These Heavy-Duty Tarp Clips provide removable attachment points for tarps, covers, awnings and other suitable outdoor fabrics without requiring an existing eyelet or grommet.

Each clip uses an adjustable screw-locking mechanism with a widened 4cm serrated gripping surface to secure material between the jaws. Constructed from ABS plastic, the clips measure approximately 7.5 × 4cm and are supplied as a 10-piece set.

Key Features

• 10 tarp clips per pack
• Adjustable screw-locking grip
• Serrated clamp surface
• Wide 4cm gripping head
• ABS plastic construction
• Supplier-stated maximum tensile force of 20kg
• Approx. 7.5 × 4cm per clip
• Suitable for fabrics up to 3mm thick
• No existing eyelet or grommet required
• Reusable and removable
• Compact and easy to store with camping gear

Adjustable Locking Grip

Each clip uses a twist-adjustment knob to control the pressure applied to the material.

This allows the grip to be tightened after positioning and loosened again when packing down, providing a reusable attachment point without permanently modifying the fabric.

Wide Serrated Clamp

The gripping head measures approximately 4cm / 1.57in wide and incorporates a serrated surface designed to improve its hold on suitable fabric.

This can be useful when an additional tie-down point is required away from the existing eyelets of a tarp or cover.

Suitable for Fabrics Up to 3mm

The supplier recommends the clips for thicker fabric surfaces up to approximately 3mm / 0.12in.

They are not recommended for very light or thin fabrics, as concentrated clamping pressure may mark or damage unsuitable material.

Suitable Applications

The clips can provide additional or replacement attachment points for:

• Camping tarps
• 4WD awnings
• Canopies
• Tent flys and suitable tent fabrics
• Shade covers
• Camping shelters
• Caravan and camper covers
• Pool covers
• Ground covers
• Temporary outdoor covers
• Adding extra guy-line points
• Replacing an attachment point where an eyelet is unavailable

When combined with suitable guy lines and anchors, additional attachment points can also help distribute tension across larger tarp and shelter setups.

Specifications

• Product Type: Adjustable Tarp Clip
• Quantity: 10 Pieces
• Material: ABS Plastic
• Dimensions: Approx. 7.5 × 4cm
• Clamp Head Width: Approx. 4cm / 1.57in
• Maximum Fabric Thickness: Approx. 3mm / 0.12in
• Adjustment: Screw / Twist Knob
• Grip Surface: Serrated
• Maximum Tensile Force: 20kg – supplier stated

Package Includes

• 10 × Adjustable Tarp Clips

Please Note

The 20kg maximum tensile force is a supplier-stated figure. No independent test standard, certified working-load limit or safety factor has been supplied, so this figure should not be interpreted as a certified safe working load.

These clips are intended for tarps, covers, awnings and similar outdoor fabric applications. They should not be used for climbing, lifting, towing, vehicle recovery, fall protection or other safety-critical load-bearing purposes.

The supplier specifically recommends the clips for thicker fabrics up to 3mm and advises against using them on very light or thin materials. Always test the grip on a small area first where fabric damage is a concern.

Holding strength will vary according to the fabric material, thickness, clamp adjustment, installation angle and environmental conditions. Inspect the clips and fabric regularly when used in windy conditions.